SKU: 71704911951

aluminium serveerschaal 33cm 100 stuks

Sale price$28.14 Regular price$31.27
Save 10%

Pay in installments of $7.82 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

aluminium serveerschaal 33cm 100 stuksKURTT Alu Servierplatte oval 33 cm die Einweg Prsentationsplatte, die Traiteure, Fleischer, Partyservice und Gastronomiebetriebe whlen, um Fleisch, Fisch, Kse und Aufschnitt im Tagesgeschft anzurichten ohne Abwasch. 33 cm lang, oval und flach, mit geriffeltem Rand, der Saucen und Jus auf der Platte hlt. Stabil genug fr ein ganzes Hhnchen, eine Kseplatte oder einen Carpaccio Service, ohne zu verformen. Nach dem Service im Altmetall entsorgen kein

KURTT Alu-Servierplatte oval 33 cm — die Einweg-Präsentationsplatte, die Traiteure, Fleischer, Partyservice und Gastronomiebetriebe wählen, um Fleisch, Fisch, Käse und Aufschnitt im Tagesgeschäft anzurichten — ohne Abwasch. 33 cm lang, oval und flach, mit geriffeltem Rand, der Saucen und Jus auf der Platte hält. Stabil genug für ein ganzes Hähnchen, eine Käseplatte oder einen Carpaccio-Service, ohne zu verformen. Nach dem Service im Altmetall entsorgen — kein Spülen, kein Lagern, keine Rückführung. Karton mit 100 Stück für den professionellen Bedarf. Bestellung vor 14:00 Uhr = Versand am selben Werktag.

Spezifikationen

  • Marke: KURTT
  • Material: Aluminium, lebensmittelecht, 100 % recycelbar
  • Form: oval, mit geriffeltem Rand
  • Länge: 33 cm
  • Deckel: nicht enthalten
  • Geeignet für: Servieren, Buffet, Präsentation, Backofen (zum Warmhalten)
  • Mikrowelle: nicht geeignet
  • Verpackungseinheit: Karton mit 100 Stück
  • Versand: Bestellung vor 14 Uhr = Versand am selben Tag

Hinweis: Ohne Deckel geliefert. Aluminium ist NICHT mikrowellengeeignet.

Auch im größeren Format erhältlich

KURTT Alu-Servierplatte oval 43 cm (10er-Pack) — für größere Gesellschaften, ganze Fleischstücke und umfangreichere Platten.

Die 33 cm ist das Standardmaß für 4 bis 6 Personen oder einzelne Buffetgerichte. Die 43 cm ist die Wahl, wenn Sie eine ganze Gesellschaft von einer Platte bedienen oder wenn das Gericht schlicht mehr Fläche braucht — ein ganzer Lachs, eine große Fingerfood-Platte oder eine ausgedehnte Antipasti-Präsentation.

Oval 33 cm — das klassische Serviermaß

Die ovale Form ist nicht zufällig der Standard für Servierplatten. Sie passt auf jeden Tisch, ohne zu dominieren, folgt der natürlichen Form von Fleisch und Fisch und wirkt eleganter als ein eckiges Tablett. Ein tranchierter Roastbeef auf einer ovalen Alu-Platte sieht nach bewusster Präsentation aus — nicht nach Notlösung. Die Länge von 33 cm reicht für einen stattlichen Auftritt, bleibt aber kompakt genug, um neben anderen Platten auf einer Buffettafel Platz zu finden.

Buffet ohne Abwasch

Der zentrale Vorteil gegenüber Porzellan: Nach dem Event wird die Platte entsorgt statt gespült, getrocknet, verpackt und zurückgebracht. Bei einem Buffet für 50 Gäste mit 8 Gerichten sparen Sie 8 Porzellanplatten, die sonst gereinigt und gelagert werden müssten. Multipliziert mit der Anzahl Events pro Monat — der Zeitgewinn ist erheblich.

Formstabil — kein Durchbiegen

Nichts ist unangenehmer als eine Servierplatte, die sich beim Anheben durchbiegt und den Inhalt zur Mitte rutschen lässt. KURTT Alu-Platten sind stabil genug, um beladen mit Fleisch, Fisch oder einem kompletten Salat angehoben und transportiert zu werden. Der geriffelte Rand sorgt für strukturelle Stabilität und eine professionelle Optik.

Vom Ofen auf den Tisch

Die Platte kann kurz in den Backofen, um Speisen vor dem Servieren auf Temperatur zu bringen. Vorgewärmt bleibt tranchiertes Fleisch oder Fisch länger warm auf dem Buffet. Nach dem Servieren entfällt die Reinigung — Platte entsorgen, nächste aus dem Stapel nehmen. Bei Events, wo Geschwindigkeit zählt, ist das der Unterschied zwischen einem reibungslosen Buffet und einem logistischen Engpass am Spülbecken.

Karton mit 100 Stück — Vorrat für die Saison

Caterer, Traiteure und Event-Organisatoren, die regelmäßig Buffets ausrichten, bestellen im Volumen. 100 Platten pro Karton decken mehrere Events. Die Platten stapeln sich kompakt ineinander und nehmen minimal Lagerplatz ein — ein Stapel von 100 Platten ist nicht größer als eine Schachtel DIN-A4-Papier. Immer genug auf Lager, nie eine Platte zu wenig im entscheidenden Moment.

Einsatzbereiche

KURTT Alu-Servierplatten 33 cm sind die professionelle Wahl für Catering-Betriebe, die Buffetplatten brauchen, die nach dem Service entsorgt werden können; Traiteure, die Fleisch-, Fisch- und Käseplatten bei Heimlieferung präsentieren; Event-Organisatoren, die Feiern und Empfänge ausrichten, wo Porzellan unpraktisch oder zu aufwendig ist; Gastronomiebetriebe, die Catering-Aufträge neben dem regulären Service abwickeln, ohne zusätzliches Geschirr anschaffen zu wollen; Fleischer und Feinkostgeschäfte, die bestellte Aufschnittplatten auf einem professionellen Support präsentieren; und Privatpersonen, die Geburtstag, Grillfest oder Hochzeit feiern und sich den Abwasch sparen wollen.

Häufig gestellte Fragen

Kann ich die Platten im Backofen verwenden? Ja, die Platten sind backofengeeignet. Nutzen Sie sie, um Speisen kurz zu erwärmen oder Fleisch vor dem Servieren warm zu halten.

Sind die Platten stabil genug für schwere Gerichte? Ja, die geriffelte Konstruktion gibt den Platten ausreichend Stabilität, um beladen mit Fleisch, Fisch oder einem kompletten Salat angehoben und transportiert zu werden.

Was ist der Unterschied zur 43-cm-Variante? Die 33 cm ist das Standardmaß für 4 bis 6 Personen oder einzelne Buffetgerichte. Die 43 cm ist die Wahl für größere Gesellschaften, ganze Fleisch- oder Fischstücke sowie umfangreiche Fingerfood-Platten.

Kann ich die Platten auch als Unterteller verwenden? Ja, die ovale Form und die professionelle Optik machen die Platten auch als Unterteller oder Präsentationsplatte auf einer gedeckten Tafel geeignet.

Sind Aluminiumplatten recycelbar? Ja, Aluminium ist zu 100 % recycelbar. Spülen Sie die Platte nach Gebrauch kurz aus und entsorgen Sie sie im Altmetall.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 71704911951

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 27 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Elton Smith
Carnegie, US
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
H
Verified Purchase
hearmeout
Waukegan, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Chelsea, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
West Palm Beach, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Los Angeles, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026

recommand products