SKU: 21837442316

CAT Trimble Dual MS995 + CB460 Display Machine Control Kit, 3D Automatics Loaded

Sale price$10350.00 Regular price$11500.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

CAT Trimble Dual MS995 + CB460 Display Machine Control Kit, 3D Automatics LoadedDual GNSS Machine Control Kit 9JA Enterprise CAT Trimble Dual MS995 GNSS Receiver + CB460 Display Fully Loaded Machine Codes Complete dual antenna GNSS machine control kit running the full CAT AccuGrade Trimble GCS900 stack. Two MS995 receivers paired with a CB460 in cab display loaded with the full range of machine licenses including 3D Automatics for dozer, grader, scraper, and trimmer applications. Verified and inspected in house, ready to install

Dual GNSS Machine Control Kit · 9JA Enterprise

CAT / Trimble Dual MS995 GNSS Receiver + CB460 Display — Fully Loaded Machine Codes

Complete dual-antenna GNSS machine control kit running the full CAT AccuGrade / Trimble GCS900 stack. Two MS995 receivers paired with a CB460 in-cab display loaded with the full range of machine licenses — including 3D Automatics for dozer, grader, scraper, and trimmer applications. Verified and inspected in-house, ready to install and run grade.

Good Condition ✓ Verified & Inspected In-House Fully Loaded · 3D Automatics Ships Worldwide
Fully Licensed Machine Control Kit

Run 3D Automatics on Almost Any Machine

This is not a single-machine kit. The CB460 in this package is loaded with active licenses for ten machine types — including full 3D Automatics (automatic blade control) on dozer, grader, trimmer, wheel tractor-scraper, and carry-all scraper applications. Move the kit between machines in your fleet without buying additional licenses. The dual MS995 receiver configuration delivers blade-tip positioning across both ends of the blade for true 3D grade control.

CB460 Option Keys · Active Machine Licenses

Loaded Machine Configurations

The CB460 in this kit has been verified to contain the following active machine license codes. 3D Automatics enables full automatic blade/implement control to design. 3D Indicate provides 3D guidance to the operator without automation.

Machine Type License Tier
Trimmer 3D Automatics
Grader 3D Automatics
Dozer (Track-Type Tractor) 3D Automatics
Wheel Tractor-Scraper 3D Automatics
Carry-All Scraper 3D Automatics
Excavator 3D Indicate
Soil / Landfill Compactor 3D Indicate
Rubber Tire Dozer 3D Indicate
Towed Scraper 3D Indicate
Wheel Loader 3D Indicate
Current Firmware & System Info
Product Line AccuGrade
Software Version 13.19-RC2
OS Version 7.6.0
Operating Mode 3D · 2× GNSS

Kit Specifications
Configuration Dual GNSS Receiver Machine Control Kit
GNSS Receivers (2) CAT / Trimble MS995 — dual-antenna for 3D blade control
In-Cab Display CAT / Trimble CB460 (AccuGrade / GCS900 platform)
Operating Mode 3D Machine Control · 2× GNSS
Machine Licenses 10 active machine types · 5 with full 3D Automatics
Firmware 13.19-RC2 (OS 7.6.0)
Condition Good · Verified & Inspected In-House
What's Included
  • (2) CAT / Trimble MS995 GNSS Receiver Heads
  • CAT / Trimble CB460 In-Cab Display
  • Display Cable Harness
  • Hard Transport / Storage Case
  • Loaded Machine License Codes (see full list above)
Verified & Inspected In-House

This kit has been powered on, inspected, and verified by our in-house technical team. Firmware and option keys have been confirmed on the CB460 — what you see in the license table above is what arrives in your case.

9JA Quality Guarantee

This kit is in good cosmetic and operational condition with visible field use consistent with working machine control equipment. Both MS995 receiver heads and the CB460 have been verified functional. The option key configuration shown above is loaded on the CB460 and ready to deploy.

We ship worldwide. Send us a message with any pre-sale technical questions, machine compatibility checks, or to verify specific option keys for your fleet — we know this equipment inside and out.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 21837442316

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 347 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Sherry
West Palm Beach, US
★★★★★ 5
Good shelves for the price can be challenging to install correctly
Size: 16 Inch, Color: White, Size: 16 Inch, Color: White
Good quality shelves for the price. Happy with the purchase. They give you assorted hardware to mount each shelf. Wall anchors for masonry or brick and anchors for drywall as well as screws to affix shelf to the wall bracket. The installation was fairly easy but it can be a bit difficult to get the bracket leveled on the wall. The “level” they give you is useless, it is only the tube - not in a housing, so 1 1/2” long. You will need a better level. Basically you place the bracket where you want the shelf to go then make sure it is level and take a pencil to mark the holes. We ended up using a heavier quality wall anchor so only needed 2 anchors instead of the four they send you. Once the bracket is on, slide the shelf onto the bars coming from the bracket and use the 2 set screws to secure it in place. Check for level and if it isn’t you can remove shelf and loosen bracket screws and wiggle the bracket while still attached while retightening screws. We had to re-level one of our shelves this way. Hope this helps and that it makes sense. As for weight capacity I wouldn’t want to put more than a couple of pounds on a shelf. As it is secure, it is hollow inside and too much weight would probably either cause the shelf to sag or damage your wall
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 25, 2025
E
Verified Purchase
Emy R.
Charlottesville, US
★★★★★ 5
Excellent product with height recommendation
Size: 24 Inch, Color: White, Size: 24 Inch, Color: White
My bathroom renovation is turning out great. These shelves are beautifully stable and show no visible assembly. The idea of ​​these floating shelves is brilliant.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
L
Verified Purchase
Lisa Espinosa
Charlottesville, US
★★★★★ 5
Beautiful and sturdy
Size: 24 Inch, Color: White
Excellent quality shelves. All hardware came with them and also the stickers to cover the screws. I also placed a plant on one of the shelves and it’s not leaning and again very nice and secure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
L
Verified Purchase
Lo
Louisville, US
★★★★★ 5
Great shelves
Size: 24 Inch, Color: White
Easy to assemble and comes with everything you need for drywall or wood. Nice color and texture and comes with stickers to hide the holes underneath. I bought two sets of three. These are very long, so I recommend just using two at a time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026
K
Verified Purchase
Khrystal
Battle Creek, US
★★★★★ 5
JAXPETY Room Divider Panel 6Ft Privacy Screen Wall Divider 88" W x 73" H - 3 Panel Black
Color: Black, Size: 3-Panel, Color: Black, Size: 3-Panel
I was looking for a screen to use while making video calls. I am on a budget, wanted something easy to put together, and would hide my apt in the background. Being on a budget, I thought my purchase qualified for the coupon. I was mistaken but contacted the seller. I received a quick response explaining how the coupon was applied. I was happy with the quick response and explanation which I verified when I went back to the page. The once all put together the screens are light weight and fairly easy to move. they do not seem to be made for easy daily breakdown. However, if you should need to take them apart to move or something, easy to break down. Depending on lighting will depend on if you find them transparent. I don't mind possible vague outlines; I was looking so no real details of my belongings in the background could be seen (shelves; figurines; etc.) My apt living room has no overhead light source, so floor lamps give light. In the 3 photos of 2 of the screens put together; the first is with a lamp in front and back of the screen as well as a tv on. The next has the tv off lamps still on and the screen reflecting the pc monitors. The third is with both lamps and the tv off, monitors on but not as reflective. In the box, you have all the parts you need as well as a small tool and an instruction manual. Item 'bags' are number [though they may come off in the box] to assist with assembly. Now assembly can be easy or hard depending on your abilities and the area you are working in. I have bad knees, so kneeling was not an option for me. My first attempt to put this together, I put the 'feet bases' on while still connecting the top bar. It made it twice as hard, and I stretched the fabric more than was necessary causing wholes around some of the stitching and stretching them a little. As well as causing some stitching to come undone on one of the pictured areas. Once I took off the 'feet bases', I had an easier time to screwing in the top bars. You will still need some hand strength, which I don't have much of, but it is possible. I use the grip things to open pickles jars. Once the screens were assembled, I followed the instructions of tying an outer screen to the inner screen and using the Velcro 'privacy flaps' to complete the connection. I have what I think is low shag carpeting which they were able to stand stably on once I wiggled them into standing straight up and in place. Given these post pandemic times, I am overall happy with both the divider and the price. The 2 things I do not like about the divider is the difficulty putting in the top bar [after connecting the top and sides] and storability when not in use issue I am having. Others with larger space will likely not have the last issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2025

recommand products