SKU: 22399511801

Universal Buffer

Sale price$152.10 Regular price$169.00
Save 10%

Pay in installments of $42.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 17 - Jul 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Universal BufferThe Universal Buffer is a two channel (stereo) buffer, which can be configured to provide any of the following functions: Single ended (unbalanced, RCA) to differential (balanced, XLR) conversion. Differential (balanced, XLR) to single ended (unbalanced, RCA) conversion. Straight through buffer (single ended to single ended or differential to differential). Signal inverter. Can be configured with gain by adding two resistors. By adding a volume

The Universal Buffer is a two-channel (stereo) buffer, which can be configured to provide any of the following functions:

  • Single-ended (unbalanced, RCA) to differential (balanced, XLR) conversion.
  • Differential (balanced, XLR) to single-ended (unbalanced, RCA) conversion.
  • Straight-through buffer (single-ended to single-ended or differential to differential).
  • Signal inverter.
  • Can be configured with gain by adding two resistors.

By adding a volume control and input selector, multiple Universal Buffer boards can be configured as a full-featured preamplifier with support for both balanced and unbalanced sources and loads.

Technical Documentation

  • Specifications
  • Circuit Topology
  • Performance Graphs
  • The full set of specifications for the Universal Buffer are tabulated below.

    Parameter Value Notes
    Number of Channels 2
    Power Supply Voltage ±2.5 – ±17 V
    Quiescent Power Supply Current

    50 mA

    65 mA

    Nominal

    Maximum

    THD

    < 0.00001 %

    (-140 dB)

    2.0 V RMS
    THD+N

    < 0.00025 %

    (< -112 dB)

    2.0 V RMS
    THD+N

    < 0.00025 %

    (< -112 dB)

    +27.5 dBu
    IMD: SMPTE 60 Hz + 7 kHz @ 4:1 -107 dB 2.0 V RMS
    IMD: DFD 18 kHz + 19 kHz @ 1:1 -119 dB 2.0 V RMS
    IMD: DFD 917 Hz + 5.5 kHz @ 1:1 -109 dB 200 mV RMS
    Multi-Tone IMD Residual < -148 dB Ref.: 2.0 V RMS AP 32-tone, 2.0 V RMS
    Gain 0 dB (1.0×) Can be increased by resistor option.
    Gain Flatness ±0.1 dB 20 Hz - 20 kHz
    Bandwidth DC – 280 kHz 100 mV RMS, -3 dB
    Slew Rate 2.4 V/µs 100 kΩ || 220 pF load
    Total Integrated Noise and Residual Mains Hum 1.7 µV RMS 20 Hz - 20 kHz, A-weighted
    Total Integrated Noise and Residual Mains Hum 2.1 µV RMS 20 Hz - 20 kHz, Unweighted
    Dynamic Range (AES17) 137 dB 1 kHz
    Channel Separation > 125 dB 20 Hz - 20 kHz
    Common-Mode Rejection Ratio > 65 dB 20 Hz - 20 kHz
    Input Impedance 48 kΩ
    Output Impedance < 0.1 Ω
    PCB footprint 60 × 65 mm
    Fully assembled dimensions

    60 × 65 × 15 mm

    30 g

    (W × D × H)

     

    All parameters are measured at a power supply voltage of ±15 V, 100 kΩ load impedance, and differential input/output, unless otherwise noted.

    Sound Quality

    I designed the Universal Buffer to be sonically transparent and firmly believe I have achieved that goal. I generally prefer precise amplifiers as they render the source material naturally, without any colouration, and offer a spacious and realistic sound stage.

  • The Universal Buffer features a balanced differential input. This input can accept both differential (balanced) signals and, by jumper configuration, single-ended (unbalanced) signals. The Universal Buffer provides both a balanced differential output and a single-ended (unbalanced) output. In addition, it can be configured to provide gain and/or signal inversion. 

    A simplified block diagram of one channel of the Universal Buffer is shown below.

  • Measuring the -140 dB THD of the Universal Buffer is a significant challenge, in particular as the analyzer section of the Audio Precision APx525 analyzer is only good to -125 dB and its source to -112 dB. Thus, I use a precision oscillator with a THD below -140 dB and a notch filter to attenuate the fundamental frequency. The resulting measurement of the distortion residual is shown below. As shown, the third harmonic is just below -140 dB at 2 V RMS output voltage.

    The graph below shows the THD+N vs output level. The Universal Buffer delivers just over +27 dBu (differential) at the onset of clipping. With single-ended input, the maximum clean output is 6 dB lower. Note that the sharp jumps (aside from when the buffer clips) are caused by range switching in the APx525. The THD+N vs output power plots mostly show the THD+N floor of the measurement system.

    The Universal Buffer can be operated at a power supply voltage of ±2.5 to ±17 V. The absolute maximum supply voltage is ±18 V. The power supply should be regulated for the best performance. 

    Naturally, the maximum clean output voltage provided by the Universal Buffer depends on the applied supply voltage. The relationship is shown in the graph below.

    The THD+N versus frequency measurement below basically shows the noise floor of my APx525 audio analyzer.

    Siegfried Linkwitz argues that the 1 kHz + 5.5 kHz intermodulation distortion (IMD) measurement is one of the measurements which is more indicative of the perceived sound quality. He bases this argument on the fact that IMD products in this measurement fall in the frequency range where the ear is the most sensitive (see the Fletcher-Munson curves for more detail). I think this argument carries a good amount of weight, so I measured the Universal Buffer accordingly. The measurement is shown below. Note that due to a limitation in the IMD source of the APx525, the frequencies used must be an integer multiple of each other. Thus, I measured at 917 Hz (5500/6) + 5.5 kHz. The result is shown below. 

    The more conventional IMD measurements are shown below. The two plots show the SMPTE (60 Hz + 7 kHz @ 4:1) IMD and DFD (18 kHz + 19 kHz @ 1:1) IMD, respectively. Poor SMPTE IMD is often indicative of thermal issues or power supply issues in a circuit. The 18k+19k IMD is indicative of the loop gain available in the buffer near the end of the audible spectrum, which can be telling of the sound quality. The Universal Buffer provides exemplary performance on both of these measurements.

    Audio Precision has developed a multi-tone test signal, which contains 32 tones from 15 Hz to 20 kHz, logarithmically spaced in frequency. This test signal sounds a bit like an out-of-tune pipe organ. It is basically the closest I can get to music with a deterministic test signal. Thus, I argue that this multi-tone signal should be used in an IMD test for the best correlation between measurements and perceived sound quality. I run this test at 2.0 V RMS (which is also the 0 dB reference in the plot). Note that even the tallest IMD components are more than 147 dB below line level. This is likely why the Universal Buffer sounds transparent. This measurement shows that it does not add anything (or at least extremely little) to the source signal. Also note that the output is completely free of mains-related hum or noise.

    The plot below shows the residual mains hum and noise of the Universal Buffer when powered by a regulated power supply. The result shows the buffer outputs only minimal mains-related signal components (which are most likely from the test setup).

    As the Universal Buffer is a stereo circuit, I measured the channel separation. As shown below, the channel separation is truly exemplary, measuring nearly 140 dB midband.

    When used with a differential source, the Universal Buffer provides rejection of any signals imposed equally on both wires in the differential signal pair. Common sources of such common-mode noise includes mains hum. As shown below, the Universal Buffer provides more than 85 dB of CMRR at the mains frequency.

    For completeness, the amplitude response and gain variation are shown below.

    Transient Response Measurements

    One of the many applications of the Universal Buffer is as the output stage in a preamplifier. Thus, the Universal Buffer should be able to drive the capacitance of the interconnect cable connecting the Universal Buffer to the power amp or load. This cable capacitance tends to measure roughly 33-50 pF/m. Thus, as shown below, the Universal Buffer is capable of driving over 100 m of interconnect cable cleanly.

    The measurements below show the transient response of the Universal Buffer for increasing load capacitance. On its single-ended output, the Universal Buffer drives 10 nF cleanly and 22 nF with controlled overshoot. Even at higher load capacitances, the Universal Buffer remains stable.

    The measurements for the differential output are shown below. As shown, the Universal Buffer can drive 4.7 nF cleanly on the differential output and even drive 10 nF with controlled overshoot.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 22399511801

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Stephanie
Pawtucket, US
★★★★★ 5
Ultimate Relief for Dry Skin!
Size: 20.3 Fl Oz (Pack of 3)
I recently purchased the Vaseline Men's Healing Moisture Hand & Body Lotion for my husband, and it has quickly become a household favorite! If you're on the hunt for a fast-absorbing, effective solution for dry or cracked skin, look no further. First and foremost, the speed at which this lotion absorbs into the skin is impressive. No greasy residue, just instant relief. My husband, who is usually hesitant about using lotions, loves how this one doesn't leave a sticky or oily feeling. It's a game-changer for him, and I've noticed a significant improvement in the moisture levels of his skin. The healing properties are remarkable. His hands, which are prone to dryness and cracking, have become noticeably softer and smoother since using this lotion. The formula is gentle yet powerful, making it an ideal solution for daily use without causing any irritation. The subtle, masculine fragrance is another plus. It's not overpowering but leaves a fresh and clean scent that lingers just enough. The pump dispenser is practical and ensures that the lotion is dispensed in the right quantity, preventing unnecessary waste. The size of the bottle is generous, offering great value for the price. With daily use, the lotion has lasted longer than expected, proving that a little goes a long way. It has become a staple in my husband's grooming routine, and I can confidently say that his skin has never looked or felt better. In conclusion, Vaseline Men's Healing Moisture Hand & Body Lotion is a five-star product that delivers on its promises. If you're searching for a reliable, fast-absorbing lotion for dry or cracked skin, this is the one. My husband is a satisfied customer, and we'll definitely be repurchasing in the future.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 31, 2023
R
Verified Purchase
Russell C.
Grantham, US
★★★★★ 5
Works great, smells good, and does not leave you feeling slimy or greasy.
Size: 20.3 Fl Oz (Pack of 3)
This stuff is the best for men who do not like feeling greasy when they use lotion. It works good for healing and preventing cracking and drying of skin, but it may have to be applied multiple times a day for people with very dry skin.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 15, 2026
S
Verified Purchase
skid row
Draper, US
★★★★★ 5
Great product at a great price
Size: 20.3 Fl Oz (Pack of 3)
Great price for a product that I have used and liked for years. Lotion dries quickly and has nice masculine scent. In addition to moisturizing my hands, I also use it for aftershave lotion on my face.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 30, 2026
E
Verified Purchase
Enser
Houston, US
★★★★★ 4
Lot of Waste but Great Lotion
Size: 20.3 Fl Oz (Pack of 3), Size: 20.3 Fl Oz (Pack of 3)
I have eczema and have tried dozens of lotions, and this one works great for me. The reason I have settled on this one is that it works great for my skin, not greasy, and I like the smell, not being too strong and feminine like most lotions. My only complaint is that there is a ton of leftover lotion in the bottom that the pump can't reach. I have the cut the bottle open each time so I don't waste it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2025
B
Verified Purchase
Barbara L Bumpus
Lake Worth, US
★★★★★ 5
Great product
Size: 20.3 Fl Oz (Pack of 3)
Great value for the price. Lightweight & doesn’t feel greasy. Great moisturizer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026

recommand products