Awave DSP 6-8 digital signal processor 6-in 8-out

Awave DSP 6-8 digital signal processor 6-in 8-outA standalone DSP that covers all the bases: 8 output RCA channels, 6 RCA inputs, 8 high level inputs, coax SPDIF input, optical TOSLINK input, 3. 5mm jack AUX input, Bluetooth AptX HD optional input, optional digital remote control for volume, sub level, preset selection, input selection, mute trigger. The DSP supports the following on every output channel: High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48

A standalone DSP that covers all the bases: 8 output RCA channels, 6 RCA inputs, 8 high-level inputs, coax SPDIF input, optical TOSLINK input, 3.5mm jack AUX input, Bluetooth AptX HD optional input, optional digital remote control for volume, sub level, preset selection, input selection, mute trigger.

The DSP supports the following on every output channel:

• High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48 dB/oct
• 31 band fully parametric EQ with +/-15 dB correction
• Time delay up to 15 ms for time alignment, selectable in ms, cm or inches, optional linking of multiple channel time delays
  
• Phase rotation from 0 to 360 degrees with a 1 degree resolution for phase alignment, optional linking of multiple channel phase adjustments
• Level correction from 0 to -40 dB, optional linking of multiple channel levels
• Various mixing modes for mixing more than one input channels into one output channel
• Internal pink noise generator to test each individual output channel

Configuration software for Microsoft Windows: DOWNLOAD HERE

Manufacturer provided specs:

• Power supply voltage: 9-15 VDC
  
• Idling current: 0.5A
• Switched off without DRC: 5mA
• Switched off with DRC: 4mA
• Remote IN voltage: 6-15 VDC
• Remote OUT voltage: 12 VDC (130mA)
• Output signal THD @ 1kHz, 1V RMS: 0.0004%
• Bandwidth @ -3 dB: 20Hz-22kHz
• Master input: 98 dBA
• Aux input: 96 dBA
• Channel separation @ 1kHz: 90 dB
• Input sensitivity (high-level in): 2-15V RMS, 10 kOhm
• Input sensitivity (AUX in): 0.2-5V RMS, 22kOhm
• Max output level RMS @ 0.1 THD: 4V
• Inputs: 6xRCA analogue, 1x RCA SPDIF coax, 1x 3.5mm aux, 1x TOSLINK SPDIF, 8x high-level, optional Bluetooth 5.0 AptX HD module
• Outputs: 8xRCA analogue
• Control connections: 1x USB 1.1/2.0, optional wired remote (DRC)
• 8 full setup presets
• Auto on via high level signal detect or remote input

What's included:

• 1x DSP unit
  
• 5m USB A-B cable
  
• 1x Power supply wiring harness
  
• 1x High-level input harness
• Mounting brackets and fasteners
• 1x Instructions