STEG MDSP10 +DRC +Bluetooth bundle

STEG MDSP10 +DRC +Bluetooth bundleA compact 8 channel amplifier with a new generation 10 channel DSP. 4 channels of RCA inputs, 6 high level inputs, coax SPDIF input, optical TOSLINK input, Bluetooth AptX HD optional input, digital remote control for volume, sub level, preset selection, input selection, mute trigger. 8x50W RMS @ 4 Ohm output channels, 10 channel RCA output. Perfect for 3 way active front + rear fill amplification with an external subwoofer amplifier. The powerful

A compact 8-channel amplifier with a new generation 10-channel DSP. 4 channels of RCA inputs, 6 high-level inputs, coax SPDIF input, optical TOSLINK input, Bluetooth AptX HD optional input, digital remote control for volume, sub level, preset selection, input selection, mute trigger. 8x50W RMS @ 4 Ohm output channels, 10-channel RCA output. Perfect for 3-way active front + rear fill amplification with an external subwoofer amplifier. The powerful multichannel input EQ, time alignment and allpass filtering allows for proper OEM integration. A compact, dense multichannel DSP amplifier with very powerful DSP functionality.

The DSP supports the following on every output channel:

• High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48 dB/oct
• 31 band fully parametric EQ with +/-15 dB correction
• 1st and 2nd order Allpass filters with Q control and inversion (each of the 31 EQ bands can be switched to Allpass)
• Time delay up to 15 ms for time alignment, selectable in ms, cm or inches, optional linking of channel pairs
  
• Phase phase switching between 0 and 180 degrees
  
• Level correction from 0 to -40 dB, optional linking of channel pairs
  
• Fully functional input mixer, live mixing of inputs (2 inputs active in parallel), allows the set up of a differential rear fill
  
• Internal pink noise generator to test each individual output channel

The input of the DSP supports the following corrections on every input channel, including the COAX, TOSLINK and Bluetooth, separately:

• High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48 dB/oct
• 10 band fully parametric EQ with +/-15 dB correction
• 1st and 2nd order Allpass filters with Q control and inversion (each of the 10 EQ bands can be switched to Allpass)
• Time delay up to 15 ms for time alignment, selectable in ms, cm or inches
  
• Phase phase switching between 0 and 180 degrees
  
• Level correction from 0 to -40 dB

Configuration software for Microsoft Windows: DOWNLOAD HERE

Manufacturer provided specs:

• Power supply voltage: 9-15 VDC
• Idling current: 1.5A
• Bandwidth @ -3 dB: 10Hz-20kHz
• Output power at 1% THD-N: 8x 50W RMS @ 4 Ohm
• S/N Ratio full power A-: 100dB
• Inputs: 4xRCA analogue, 1x RCA SPDIF coax, 1x TOSLINK SPDIF, 6x high-level, Bluetooth 5.0 AptX HD module
• Outputs: 8x Speaker level amplified, 10x RCA pre-outs
• Control connections: 1x USB 1.1/2.0, wired remote (DRC)
• 8 full setup presets
• Auto on via high level signal detect or remote input

What's included:

• 1x DSP Amplifier unit
  
• 5m USB A-B cable
  
• 1x B5V2 Bluetooth module
• 1x DRC remote control
• 1x DRC remote control cable
• 1x High-level input harnesses
  
• 1x Speaker output harnesses
  
• Mounting brackets and fasteners
• 1x Instructions