Matte Lizard Grey Vinyl Wrap (SCM23)

Matte Lizard Grey Vinyl Wrap (SCM23)TeckWrap Lizard Grey is a grey with a subtle green cast, finished in super matte. It is not a flat, neutral grey; the soft green in it gives the color more character while still reading as a grey. Key Attributes Grey with a green cast: a muted grey that leans gently green, closer to sage than to a plain neutral grey. Low sheen flat finish: a full matte surface with no shine, which keeps the green quiet and the whole look soft. Solvent acrylic bond:

TeckWrap Lizard Grey is a grey with a subtle green cast, finished in super matte. It is not a flat, neutral grey; the soft green in it gives the color more character while still reading as a grey.

Key Attributes

• Grey with a green cast: a muted grey that leans gently green, closer to sage than to a plain neutral grey.
  
• Low-sheen flat finish: a full matte surface with no shine, which keeps the green quiet and the whole look soft.
  
• Solvent acrylic bond: Henkel solvent acrylic adhesive, clear and weather resistant, that grips well and stays put once it is down.
  
• Lifts off later: releases with heat when you are ready for a change, with no residue and no harm to the paint.
  
• Stretches to fit: conforms around curves and edges, with up to about 30% stretch under heat to pull over mirrors and recessed panels.

This is the part that makes Lizard Grey worth a look. Depending on the light, it can read as a straight grey or show its green side. In flat or overcast light it sits closer to a neutral grey, and in sun, or next to greenery, the sage cast comes forward. Because the finish is fully matte, none of this turns into shine or reflection, so the color stays soft and a little understated either way. It is a grey for people who find plain grey boring.

OEM Match

• Closest to Toyota Lunar Rock, the grey-green seen on the 4Runner and Tacoma.
  
• Greyer and more neutral than an olive or military green, but with a similar earthy cast.
  
• A green-leaning take on a cool grey like Audi Nardo Grey.
  
• Sits between a plain grey and a soft sage, which is what keeps it from looking ordinary.

Grey is a safe color, and the green cast is what keeps Lizard Grey from blending in with every other grey car. It looks especially good on trucks and SUVs, the 4Runner included, and it comes off cleanly later if you want a change.

Specifications

Material & Film:

• Type of Film: Medium-grade polymeric calendared film with air-release channels
• Film Thickness: 0.13 mm
• Thickness with Release Liner: 0.14 mm
• Total Film Thickness: 0.27 mm
• Dimensional Stability: Shrinkage < 0.2%
  
• Plastification: 25–32%
  
• Breaking Strength: 30.7 N/10mm (Average)
  
• 180º Peel Strength (to steel panel): 9 N/10mm (Average)

Adhesive & Liner:

• Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000cps, thickness 12 μm dry
• Release Liner: Felix Schoeller / 20-104-20-1,9 printed, double-sided PE coated Kraft, one side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)

Storage & Warranty:

• Storing Period: 3 years if stored at +10°С to +20°С, 50% relative humidity, in original packaging, away from direct sunlight
• Durability/Warranty: Datasheet

UV & Weather Resistance:

• Light Ageing in UV Exposure: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Result: 4–5, exposure duration 48h

Installation Tips

• Application Temperature: +18°С to +20°С
• Usage Temperature: -30°С to +30°С
• Tools: Standard squeegee with a soft buffer
• Conformability: Smooth and medium curved surfaces
• Directional: Yes
• Overlap Width: 3–4 mm
• Protective Cap: Remove before installation

Packaging

• Roll Width: 152 cm
• Roll Length: 18 m
• Weight: 13 kg

Important Notes

• Images, colors, and finishes on screen are approximate. Always check a physical color swatch for accuracy.
• Use rolls from the same production LOT number to avoid batch-to-batch color variation.
• The film may scratch during application or daily use; scratches are not covered under warranty.