Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
HALTECH Elite 2500 + V8 Small/Big Block GM, Ford & Chrysler Terminated Harness Kit Injector Connector: Bosch EV1Outputs: Up to 8 injector and 8 ignition. Suits: V8 GM Small Big Block V8 Ford Small Big Block Chrysler HEMI Includes: Elite 2500 ECU with DBW and Race Functions, engine harness with fuse block, firewall grommet and distributor MSD ready ignition harness, USB programming cable and USB Software Key. Notes: 8 individual ignition coil ready (Direct fire) when used with HT 130306, HT 130311, HT 130312 or HT 130313 OVERVIEW The fastest and most cost
Outputs: Up to 8 injector and 8 ignition.
Suits: V8 GM Small/Big Block V8 Ford Small/Big Block Chrysler HEMI
Includes: Elite 2500 ECU with DBW and Race Functions, engine harness with fuse block, firewall grommet and distributor/MSD ready ignition harness, USB programming cable and USB Software Key.
Notes: 8 individual ignition coil ready (Direct fire) when used with HT-130306, HT-130311, HT-130312 or HT-130313
OVERVIEW
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
- An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
- The quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle.
- The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
- efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
- quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle.
- guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
- An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
- The quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle.
- The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU OVERVIEW
Featuring a robust, environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, knock control, and much more, the Elite 1500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 1500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
- Supports 1 to 12 cylinder engines
- 2 rotor engines
- Normally aspirated or forced induction
- Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
- Staged, sequential, semi sequential, batch or multipoint injection patterns
- Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
- Connect to a wide range of display dashes and expansion devices via CAN.
- 4 x fuel injection outputs
- 4 x ignition outputs
- 12 x digital outputs
- 10 x analogue voltage inputs
- 4 x synchronised pulsed inputs
- 3 x dedicated inputs (knock, ignition switch & onboard MAP Sensor)
- 2 x dedicated engine position inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB laptop communication (Windows)
- ESP Calibration Software - intuitive and easy to use
FEATURES
- This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
- Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
- harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
- programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
- This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
- Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
ECU FEATURES
- Drive by Wire Throttle Control (DBW).
- Low Impedance Injector control with programmable injector peak and hold currents and programmable peak time.
- Flex fuel support (Direct sensor input). Tune your engine's boost, fuel and ignition by ethanol content.
- Flexible tuning setup for Petrol (Gasoline), Methanol and Ethanol.
- Closed Loop 02 Control. Dual bank control for precise tuning (with optional external CAN O2 Wideband Controller Kit).
- Knock Control. Synchronised to engine position with high speed digital filtering for accurate detection.
- Variable cam control - Independently control up to 4 camshafts.
- Closed Loop Idle Speed Control with learning for consistent idle stability.
- Long term learning (auto tune) on fuel, ignition, cam, boost and idle control maps (up to 4D).
- On-board data logging. Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory.
- Laptop data logging. DLog all available channels directly to your laptop's hard drive for both tuning and diagnostics.
- Dual CAN Bus communication for Haltech dashes and expansion devices. Supports OEM CAN and OBDII. View live engine data and set/clear diagnostic trouble codes.
- 1 - 4 Injection stages with individual injector flow rates per injector.
- Anti-Lag/Rotational idle for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions.
- Rolling Anti-Lag. Lock to your current or pre-set RPM or road speed for roll racing or pit lane limiting.
- Launch Control. Control your engine's power delivery, RPM and boost for consistent performance at the start line.
- Traction Control. Control your engine's power output via mappable front vs rear axle or individual wheel speed slip.
ADVANCED TUNING
- Tuning table resolution up to 32 x 32 x 8
- Limitless tuning flexibility. Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user-definable corrections.
- Per Cylinder Tuning Correction - 3D
- Wideband O2 Control. Connect up to 9 channels via CAN expansion devices.
- Thermocouples/EGT (Exhaust Gas Temperature). Connect up to 12 channels via external CAN expansion devices.
- Advanced Engine Protection. Set multi-level limits for sensors and protect your engine against common causes of failure.
RACE FUNCTIONS
- Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays and banked control options. 3D fuel and ignition corrections for all stages.
- Boost control. Intelligent 4D closed loop learning with flexible, user-definable axis and 14 fully user-definable corrections.
- Sequential turbo control
- CO2 boost control. Wastegate pressure and position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer.
- Flat shifting. Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
- Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery.
- Timer functions. Use the combination of the race timer and 5 additional programmable timers for time-based control of multiple engine parameters, power delivery and other user definable functions.
- Trans brake function allows smooth and consistent control of start line staging (Bump or Creep).
- Optional Upgrade - Advanced Torque Management - A fully integrated driveshaft RPM target race function that provides the ultimate control and consistency for the serious drag racer, eliminating the need for costly external controllers
RESOURCES
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 2000 reviews
Sort
Product Reviews
★★★★★ 5
Good
Color: Black, Size: 6 Panel
Love it , just what so needed , easy to put together (some what ) …
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
★★★★★ 3
Decent for the price. Instructions suck but most people should be able to figure it out. More below.
Color: Black, Size: 6 Panel, Color: Black, Size: 6 Panel
SUMMARY:
3 stars from me because it's firmly average. It's fine for the price. Assembly and materials are alright but I can see some caveats depending on your circumstances. Assembly instructions do a subpar job of pointing out some details.
ASSEMBLY INSTRUCTIONS:
Maybe it's because I'm autistic and/or building model kits and assembling stuff is my jam, but I honestly thought people were exaggerating when they were complaining about the instructions and I'd be able to flex my ~superior assembly skills.~ I was wrong! These instructions genuinely suck, and whoever is responsible for making them should be ashamed.
The instructions do a poor job of calling out some details regarding orientation of parts, and some of the images do not actually match the physical parts.
For example, it does not really outline the assembly of the end panels clearly, and I can see someone accidentally using the wrong poles. I've drawn over a photo to show what you should do to try and make it clearer. Additionally, the manual shows a flathead screw for bolting the feet into position, but the actual screw is not a flathead. It also does not point out the counterbore, so if you aren't paying attention you may put the foot pads onto the wrong side of the foot. It's also missing the fact that you need to use another one of the plastic pieces when you finish assembling a panel.
ACTUAL ASSEMBLY & MATERIALS:
To their credit, all of my bags were clearly labeled. The assembly process wasn't difficult. It's mostly just tedious and requires a fair amount of space. I was able to assemble it by myself without any real difficulty. However, the way it's assembled means two things.
One, the fabric parts aren't removable without disassembly. So if you want to use this in an environment where they would require cleaning, I would seriously recommend looking for another option. Or, you could buy this just to use the frame pieces and then somehow buy or make your own fabric pieces designed to be removable with velcro or something.
Two, because of the materials I really don't have a lot of faith in this thing surviving disassembly and reassembly. Like a lot of sorta-cheap-but-convenient furniture, it uses those spring-button connections and plastic inserts with self-tapping screws. Those things are not really meant to be disassembled and rethreaded. It also relies a lot on the tension of the poles and the fabric to keep everything rigid and squared, which I think puts a lot of pressure on the aforementioned buttons, plastic inserts, and the hollow metal rods. So I feel like that will also cause issues with disassembly and reassembly.
Basically once this thing is assembled, it's not really meant to be disassembled. The best you can do is spot-clean the fabric if you need to.
Speaking of the fabric, I didn't see any labels on them or anything in the manual that says what they are, but they feel like some kind of polyester. They generate static electricity pretty easily, and pet hair and debris sticks easily. So that's another downside of them not being easily removable.
For the most part it does seem pretty stable. The poles seem to be pretty uniform in length so they're all making contact with my floor. Obviously this isn't structural so it shouldn't be supporting anything, but the two main feet seem to be doing fine with keeping this thing upright.
CLOSING THOUGHTS:
Really, it's fine for what it is, but it could be better in a lot of little ways and the substandard quality of the instructions just seems unprofessional to me, which is why I'm being so harsh with my rating. Depending on your needs and environment you may want to consider a different option. Preferably one that is made to be disassembled with better materials, and/or one with fabric pieces made to be removed easily.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2023
★★★★★ 1
Not as it seems
Color: Black, Size: 6 Panel
these are awful... Each individual panel is fine, but when you put it together it can barely stand up, and the clips that hold it together keep popping off. Steer clear of this item.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 7, 2026
★★★★★ 5
As described
Color: White, Size: 6 Panel
Works great in my clinic
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
★★★★★ 5
Review
Size: 6Ft-without USB
Nice surge protector. Really like the amount of outlets. The big seller is the rotating plug.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026