Polymaker Panchroma Celestial PLA 1.75mm Filament 1kg

Polymaker Panchroma Celestial PLA 1.75mm Filament 1kgPanchroma Celestial PLA (from Polymaker) is a new range combining bright pastel colours with a pearlescent metallic powder to deliver an out of this world shimmering effect. The pearlescent powder chosen is up to 0. 2mm in size, ensuring excellent compatibility with a standard 0. 4mm nozzle. Learn more about what's happening with Polymaker filament changes. Features Shimmery Metallic Effect Panchroma Celestial PLA delivers beautiful range of pastel

Panchroma™ Celestial PLA (from Polymaker) is a new range combining bright pastel colours with a pearlescent metallic powder to deliver an out of this world shimmering effect. The pearlescent powder chosen is up to 0.2mm in size, ensuring excellent compatibility with a standard 0.4mm nozzle.

Learn more about what's happening with Polymaker filament changes.

Features

• Shimmery Metallic Effect - Panchroma™ Celestial PLA delivers beautiful range of pastel colours with a pearlescent glitter powder that shines through the translucency of the PLA material. Celestial PLA's shimmery surface finish helps to hide the layer lines; delivering a beautiful and colourful filament for aesthetic vases, figurines, cosplay props, puzzles and articulated models.
• High Quality Raw Materials - Panchroma™ Celestial PLA filament is made with the highest quality ingredients including Ingeo® from Natureworks. Natureworks is a world-leading biopolymers supplier based in the USA with a portfolio of high quality raw PLA materials produced from rapidly renewable plant resources. Combining Polymakers innovative R&D technologies, compounding and extrusion systems with Natureworks Ingeo® resins produces a reliable 3D printing filament to print beautiful and accurate models
• Compatibility In Mind - Panchroma™ Celestial PLA is compatible with a wide range of 3D printers and works well on most printing surface with a thin layer of glue stick applied, no heated bed is required but can sometimes be used at 40 - 60°C for better results (maximum 60°C).
• Cardboard spool with coated edge - Panchroma filament comes in upgraded packaging, featuring an enhanced coating on the edge and a fully recycled cardboard spool and box. The hard edge not only prevents the dust from fraying cardboard but also protects the edge from deformation and delamination, ideal for some multi-material systems.

Printing Settings

• Nozzle Temperature: 190°C - 230°C
• Build Plate Temperature: 25°C - 60°C
• Build Surface Temperature: Works well with most build surfaces i.e Glass, Blue Tape, BuildTak® etc
• Build Surface Treatment: Can apply Magigoo Original or PVA glue to the build surface to improve adhesion.
• Cooling Fan: ON
• Printing Speed: Up to 200mm/s
• Recommended Support Material: 
  • Single Extrusion:
    • Self Support
  • Dual Extrusion: 
    • PolyDissolve™ S1 (Dissolve in tap water)
    • PolySupport™ for PLA (Easy break-away support material)

*The above are printing recommendations based on 0.4 mm nozzle. Please note ideal printing conditions may vary depending on your 3D printer setup. For high speed 3D printers, make sure to increase your extrusion temperature in order to use higher printing speeds.

Specifications

• Net Weight: 1kg
• Material Type: PLA with pearlescent powder
• Density: 1.19 (g/cm3)

Browse more

• Browse Carbon Fibre Filament
• Browse Polymaker
• Browse ASA Filament
• Browse ABS Filament
• Browse Nylon Filament
• Browse PC Filament
• Browse PETG Filament
• Browse PLA Filaments (also PLA+)
• Browse PVA Filament
• Browse Silk Filament
• Browse SLA Resin
• Browse Speciality Filament
• Browse TPU Filament