SKU: 60503235106

2020 Yamaha XBT1800 212S CALIFORNIA Starter Motor 6S5-81800-00

$83.50 $92.78
Save 10%
No.2 Bestseller on www.gnsteacherstrainingcollege.org.in >

Pay in installments of $23.20 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2020 Yamaha XBT1800 212S CALIFORNIA Starter Motor 6S5-81800-00New Starter Motor Engine Starting Fit For Yamaha VXS VXR FX SHO FZR FZS FX CRUISER HO 6S5 81800 00 00 Features: Brand new starter, not a remanufactured or refurbished one with wear and tear. High quality magnets or field coils deliver more torque for fast starts,good working condition. Inside and out starter motors improve reliability over longer periods of time. Designed for individual vehicle power consumption, and are ready to be installed quickly

New Starter Motor Engine Starting Fit For Yamaha VXS VXR FX SHO FZR FZS FX CRUISER HO 6S5-81800-00-00

Features:
-Brand new starter, not a remanufactured or refurbished one with wear and tear.
-High-quality magnets or field coils deliver more torque for fast starts,good working condition.
-Inside and out starter motors improve reliability over longer periods of time.
-Designed for individual vehicle power consumption, and are ready to be installed quickly and easily.
-New Armatures are precision-manufactured and tested for long service life.
-Replaces existing starter motor, Just replace and ride again.
-Professional installation will be highly recommanded,installation instruction NOT included.

Specifications:
Condition: Aftermarket 100% Brand New
Fitment Type: Direct Replacement
Surface Finish: Heavy Duty
Unit Type: Starter
Number of Teeth: 13 Tooth
Rotation: CCW / Counterclockwise
Overall Length: 206mm
Center Hole to Hole Mount Spacing: 40mm

Replacement Part Number:
6S5-81800-00

Please compare the number of teeth and part number with the old part before purchasing.

Fits Models:
Fit for Yamaha FX1800 FX SUPER HIGH OUTPUT 2008/2010-2011
Fit for Yamaha FX1800 FX CRUISER SUPER HIGH OUT 2008
Fit for Yamaha FX1800 FX CRUISER SHO 2009-2011
Fit for Yamaha FX1800 FX CRUISER SVHO WAUD 2022
Fit for Yamaha FX1800 FX CRUISER HO WITH A 2022
Fit for Yamaha FX1800 FX HO WITH AUDIO 2022
Fit for Yamaha FX1800 FX SVHO WITH AUDIO 2022
Fit for Yamaha FX1800 FX LIMITED SVHO 2022
Fit for Yamaha FX1800 FX SHO 2009
Fit for Yamaha FY1800 FX CRUISER HO 2009-2011
Fit for Yamaha FY1800 FX HO 2009-2011
Fit for Yamaha FB1800 FX CRUISER HO 2012-2021
Fit for Yamaha FB1800 WAVE RUNNER FX SHO 2016
Fit for Yamaha FB1800 WAVERUNNER FX HO 2013-2015
Fit for Yamaha FB1800 WAVERUNNER FX HO 2017
Fit for Yamaha FA1800 FX CRUISER SHO 2012-2016
Fit for Yamaha FA1800 FX SHO 2012
Fit for Yamaha FA1800 WAVE RUNNER FX SHO 2013-2015
Fit for Yamaha FC1800 FX CRUISER SVHO 2014-2021
Fit for Yamaha FC1800 FX LIMITED SVHO 2017-2021
Fit for Yamaha FC1800 FX SVHO 2015-2021
Fit for Yamaha GP1800 FX HO WITH AUDIO 2021
Fit for Yamaha GP1800 2017-2018
Fit for Yamaha GP1800R 2019
Fit for Yamaha GP1800 GP1800R HO 2021
Fit for Yamaha GP1800 GP1800R HO_HO WITH A 2022
Fit for Yamaha GP1800 GP1800R SVHO 2020-2021
Fit for Yamaha GP1800 GP1800R SVHO WITH AU 2021
Fit for Yamaha GP1800 GP1800R SVHO_SVHO WI 2022
Fit for Yamaha GP1800 GP1800R SVHO_SVHO WI 2022
Fit for Yamaha GX1800 WAVERUNNER FZR 2013-2016
Fit for Yamaha GX1800 WAVERUNNER FZS 2013-2016
Fit for Yamaha GX1800 FZR 2009-2012
Fit for Yamaha GX1800 FZS 2009-2012
Fit for Yamaha SH1800 190 FSH 2016-2019
Fit for Yamaha SH1800 190 FSH DELUXE 2016-2018
Fit for Yamaha SH1800 190 FSH SPORT 2016-2018
Fit for Yamaha UX1800 190 FSH DELUXE 2019-2021
Fit for Yamaha UX1800 190 FSH SPORT 2019-2021
Fit for Yamaha UP1800 195 FSH DELUXE 2020-2021
Fit for Yamaha UP1800 195 FSH SPORT 2020-2021
Fit for Yamaha TP1800 195S 2020-2022
Fit for Yamaha XBT1800 212 2020
Fit for Yamaha XBT1800 212S 2020
Fit for Yamaha XBT1800 212S CALIFORNIA 2020
Fit for Yamaha XBT1800 212X 2017-2020
Fit for Yamaha XBT1800 212X CALIFORNIA 2018-2020
Fit for Yamaha XBT1800 212 LIMITED CALIFORNIA 2018
Fit for Yamaha XBT1800 212 LIMITED (XBT1800CLS) 2017-2019
Fit for Yamaha XBT1800 212 LIMITED S 2018-2019
Fit for Yamaha XBT1800 212 LIMITED S CALIFORNIA 2018
Fit for Yamaha XBT1800 212 LIMITED S CALIFO 2019
Fit for Yamaha AXT1800 212 2021
Fit for Yamaha AXT1800 212S 2021-2022
Fit for Yamaha AXT1800 212S CALIFORNIA 2021
Fit for Yamaha AXT1800 212XE 2021
Fit for Yamaha AXT1800 212XE CALIFORNIA 2021
Fit for Yamaha AXT1800 212XD 2021-2022
Fit for Yamaha AXT1800 212SE (FW) 2021-2022
Fit for Yamaha AXT1800 212SE CALIFORNIA 2021-2022
Fit for Yamaha XAT1800 212SS CALIFORNIA 2014-2016
Fit for Yamaha XAT1800 212SS 2012-2016
Fit for Yamaha XAT1800 212X 2012-2016
Fit for Yamaha XAT1800 212X CALIFORNIA 2013-2016
Fit for Yamaha SAT1800 242 LIMITED S CALIFO 2019
Fit for Yamaha SAT1800 242 LIMITED S 2015-2019
Fit for Yamaha SAT1800 242 LIMITED CALIFORNIA 2015-2016
Fit for Yamaha SAT1800 242 LIMITED E SERIES 2016
Fit for Yamaha SAT1800 242 LIMITED E SERIES CALIFORNIA 2016
Fit for Yamaha SAT1800 242 LIMITED S E SERIES 2016
Fit for Yamaha SAT1800 242X E SERIES 2016-2020
Fit for Yamaha SAT1800 242X E SERIES CALIFORNIA 2016-2018
Fit for Yamaha SAT1800 242X E-SERIES CALIFO (ELU) 2019-2020
Fit for Yamaha SAT1800 242S 2020
Fit for Yamaha SAT1800 242S CALIFORNIA 2020
Fit for Yamaha SAT1800 242S E SERIES (FV) 2020
Fit for Yamaha SAT1800 242S E SERIES CALIFO 2020
Fit for Yamaha SAT1800 242 LTD E SERIES 2017
Fit for Yamaha SAT1800 242 LTD E SERIES CALIFORNIA 2017
Fit for Yamaha SAT1800 242 LTD S CALIFORNIA 2017-2018
Fit for Yamaha SAT1800 242 LTD S E SERIES 2017-2019
Fit for Yamaha SAT1800 242 LTD S E-SERIES C 2019
Fit for Yamaha SAT1800 242 LTD S E SERIES CALIFORNIA 2017-2018
Fit for Yamaha SAT1800 AR240 HIGH OUTPUT 2015-2020
Fit for Yamaha SAT1800 AR240 CALIFORNIA 2015
Fit for Yamaha SAT1800 AR240 HO CALIFORNIA 2016
Fit for Yamaha SAT1800 AR240 HIGH OUTPUT 2015-2020
Fit for Yamaha SAT1800 AR240 HO CALIFORNIA 2017-2020
Fit for Yamaha SAT1800 SX240 HIGH OUTPUT 2015-2016
Fit for Yamaha SAT1800 SX240 HIGH OUTPUT 2017-2020
Fit for Yamaha SAT1800 SX240 CALIFORNIA 2015
Fit for Yamaha SAT1800 SX240 HO CALIFORNIA 2016-2018
Fit for Yamaha SXT1800 242 LIMITED 2010-2016
Fit for Yamaha SXT1800 242 LIMITED S 2010-2014
Fit for Yamaha SXT1800 242 LIMITED S CALIFORNIA 2013-2016
Fit for Yamaha SXT1800 242 LIMITED CALIFORNIA 2013-2014
Fit for Yamaha SXT1800 AR240 2014
Fit for Yamaha SXT1800 AR240 HIGH OUTPUT 2010-2013
Fit for Yamaha SXT1800 AR240 CALIFORNIA 2013-2014
Fit for Yamaha SXT1800 SX240 2014
Fit for Yamaha SXT1800 SX240 HIGH OUTPUT 2010-2013
Fit for Yamaha SXT1800 SX240 CALIFORNIA 2013-2014
Fit for Yamaha BXT1800 252S 2021-2022
Fit for Yamaha BXT1800 252S CALIFORNIA 2021-2022
Fit for Yamaha BXT1800 252SD 2021
Fit for Yamaha BXT1800 252SE 2021-2022
Fit for Yamaha BXT1800 252SE CALIFORNIA 2021
Fit for Yamaha BXT1800 252XE 2021
Fit for Yamaha BXT1800 252XE CALIFORNIA 2021
Fit for Yamaha BXT1800 AR250 2021-2022
Fit for Yamaha BXT1800 AR250 CALIFORNIA 2021-2022
Fit for Yamaha BPT1800 255XD 2021-2022
Fit for Yamaha BPT1800 255XE 2021-2022
Fit for Yamaha BXT1800 SX250 2021-2022
Fit for Yamaha BXT1800 SX250 CALIFORNIA 2022
Fit for Yamaha KXT1800 252 FSH SPORT 2021-2022
Fit for Yamaha KPT1800 255 FSH SPORT E 2022
Fit for Yamaha FPT1800 275E 2019-2022
Fit for Yamaha FPT1800 275SD 2019-2022
Fit for Yamaha FPT1800 275SE 2019-2022
Fit for Yamaha RX1800 AR190 2012-2014/2016-2018
Fit for Yamaha RX1800 AR190 CALIFORNIA 2014-/2016-2018
Fit for Yamaha RX1800 AR210 2015
Fit for Yamaha RX1800 AR210 CALIFORNIA 2015
Fit for Yamaha RX1800 SX190 2012-2016/2018
Fit for Yamaha RX1800 AR240 HO CALIFORNIA 2017
Fit for Yamaha RX1800 SX190 CALIFORNIA 2014-2022
Fit for Yamaha RX1800 SX240 HIGH OUTPUT 2017
Fit for Yamaha TX1800 AR190 2019-2021
Fit for Yamaha TX1800 AR190 CALIFORNIA 2019-2022
Fit for Yamaha TX1800 SX190 2019-2022
Fit for Yamaha TP1800 AR195 2019-2021
Fit for Yamaha TP1800 SX195 2019-2022
Fit for Yamaha RM1800 AR192 2013-2016
Fit for Yamaha RP1800 AR195 2017-2018
Fit for Yamaha RP1800 SX195 2017-2018
Fit for Yamaha RM1800 SX192 2013-2016
Fit for Yamaha VX1800 VXR 2011-2019
Fit for Yamaha VX1800 VX CRUISER WITH AUDI 2021-2022
Fit for Yamaha VX1800 VX LIMITED HO 2021-2022
Fit for Yamaha VX1800 VXS 2011-2016
Fit for Yamaha VX1800 GP1800R HO 2020
Fit for Yamaha VC1800 VX CRUISER HO 2017-2020
Fit for Yamaha VC1800 VX CRUISER HO 2016

(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)

Package includes:
1x Starter Motor

Note:
All electrical components must be fitted by a qualified technician.
Before fitting electrical components ensure the root cause of the original failure has been addressed.
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 60503235106

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Elton Smith
Lake Worth, US
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
H
Verified Purchase
hearmeout
Whiting, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Natrona Heights, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Whiting, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Lowell, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026

recommand products

Mugen MBX8 ECO Team Edition Sealed Bearing Kit
25.99
XRAY GTXE Ceramic Sealed Bearing Kit
131.99
Axial SCX10 III JLU Wrangler RTR Ceramic Sealed Bearing Kit
102.00
HPI Apache SC Flux Sealed Bearing Kit
20.00
Team Associated DR10 Team Kit Ceramic Sealed Bearing Kit
118.99