Rockford Fosgate Punch P400X2 - 2 Channel Amplifier

Rockford Fosgate Punch P400X2 - 2 Channel AmplifierWhether you're looking to drive high frequency component speakers or low frequency subwoofers, the P400X2 has the power and flexibility you need to put some serious PUNCH in your vehicle. The power available from such a small amp means it's a great match for a 2 ohm DVC subwoofer or pair of 8 ohm SVC subwoofers. The Punch P400X2 is a 2 channel stereo amplifier capable of producing 200 Watts into each channel at 2 Ohms. The P400X2 amplifier is great

Whether you're looking to drive high frequency component speakers or low frequency subwoofers, the P400X2 has the power and flexibility you need to put some serious PUNCH in your vehicle. The power available from such a small amp means it's a great match for a 2-ohm DVC subwoofer or pair of 8-ohm SVC subwoofers.

The Punch P400X2 is a 2-channel stereo amplifier capable of producing 200 Watts into each channel at 2-Ohms. The P400X2 amplifier is great with full-range or component systems or can be bridged for use with 2 or more subwoofers.

High level input capable with Auto Turn-On circuit
RCA pass-thru outputs
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz.
Muted turn on
Stealth top mounted control panel
Cast aluminium heatsink
Short circuit protection
Over current protection

Number of Channels:2
Rated Power (RMS Continuous Power):     125 Watts x 2 @ 4-Ohm
200 Watts x 2 @ 2-Ohm
400 Watts x 1 @ 4-Ohm Bridged
Total Power (Sum of Rated Power):     400 Watts RMS
Bridgeable: Yes
Efficiency (average): 72% @ 4-Ohm
Crossover Controls: High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Signal Input: Hi/Low level: 1 RCA pair
Signal Output: Low level: 1 RCA pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 8 AWG to 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminium
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power/Protect/Thermal LED
Input Clip LED
Output Clip LED
Circuit Topology Class: Class-A/B
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Dimensions (HxWxL): 2.38 x 7.76 x 11.03 (in)
6.05 x 19.71 x 28.02 (cm)