Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
RFX Pro Wheel Spacers FrontPro Series Wheel Spacers RFX Pro Series wheel spacers are lighter and more durable than OEM. Constructed from 7075 T6 aluminium and colour anodised to increase durability. This helps to reduce surface wear and lessens the amount of dirt entering the hub which in turn extends the life of the bearing. Designed with a rear lip to help keep them hooked into the seals, this reduces the chance of falling out during maintenance, speeding up wheel changes.
Pro Series Wheel Spacers
RFX Pro Series wheel spacers are lighter and more durable than OEM.
Constructed from 7075-T6 aluminium and colour anodised to increase durability. This helps to reduce surface wear and lessens the amount of dirt entering the hub which in turn extends the life of the bearing.
Designed with a rear lip to help keep them hooked into the seals, this reduces the chance of falling out during maintenance, speeding up wheel changes.
RFX products are tested and used by many top Grand Prix and British Motocross teams.
- 7075-T6 Aluminium Construction.
- Colour anodised for durability.
- Machined rear location lip.
Tag Line
CNC Machined
For a tighter tolerance
Fitting Instructions
- Start with the motorcycle on a box stand with the wheels raised from the ground.
- Remove the large spindle nut and loosen any pinch bolts on the lower fork leg.
- Remove the spindle from the wheel this may require the use of a brass punch and hammer if tight.
- Front wheel will now remove.
- The rear wheel should now be loose enough to push forward and lift the chain from the rear sprocket.
- Rear wheel will now remove.
- Remove the wheel spacers from the wheels.
- Clean in and around the seals with contact cleaner such as Maxima Electrical Contact and re-grease under the seal.
- Fit the new wheel spacers.
- Make sure to open the brake pads apart inside the brake callipers to give you extra room when re-fitting the wheel.
- Re-fit the wheels and push the spindles through.
- Re-fit the chain and set the proper chain tension by adjusting the axle blocks.
- Tighten
the large spindle nuts to the correct torque setting. - With the bike of the stand pump the front forks up and down to align the front forks then tighten the pinch bolts.
- Finally pump the brakes to re- align the callipers.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 71 reviews
Sort
Product Reviews
★★★★★ 5
Great low cost USB C to 4K HDMI splitter adaptor
Color: Black
The Anker USB C Hub 5-in-1 USBC to HDMI splitter with 4K display with one powered USB c and 2 USB A ports works flawlessly and is a perfect travel companion or simple and inexpensive desktop dock to connect a moderan USB C only laptop to a large monitor up to 4K resolution. It supports 4K at 60 Hz so not for high speed gaming but it is flicker free for daily work where running at 60 Hz provides a clean looking 4K display. The USB C and USB A ports work perfectly. I already have four of these in different port configuration but wanted the 4K extension for travel and this was the best one for quality and bang for the buck.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Compact hub that punches well above its size
Color: Black
This hub handles 4K HDMI output and three data ports cleanly without any noticeable lag or connection issues. The powered ports on both the USB-C and USB-A sides are a useful feature for running peripherals without draining the host device. Compact enough to leave plugged in permanently without getting in the way. Works reliably on MacBook and Dell machines as described. Good value for a well-built hub with a solid feature set.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 8, 2026
★★★★★ 5
Compact, Travel friendly, Works well with ROG ALLY
Color: White
This is a compact and well built adapter, and it is travel friendly. I use it for my ROG ALLY when I don’t want it docked and still need charging and other device inputs. It has just about enough ports for what I need, usb-c power delivery port for charging (ROG ALLY can still run at maximum performance using this with a 100W charging brick and a cable that allows 100W power pass through). I use the remaining USB-C port and two USB-A ports for external hard drives or gaming controller 2.4Ghz receiver. Transferring files between ROG ALLY and an external SSD with this adapter is fast, could reach above 380 mb/s. All the device inputs were as advertised, “plug and play”. The hdmi port also gives me an option to connect my ROG ALLY to TV when I don’t have the dock which takes up more space for traveling. One thing to note, you will have to use the USB-C port on your PC which provides more power (usually at the back and not on the front of the pc), if not plugged in to a power source. When I received my first order, I plugged it into the front USB-C port of my mini PC, just for my wired keyboard and mouse, the computer didn’t recognize it and couldn’t get any input from my keyboard and mouse. I returned the first one and thought it wouldn’t work as I expected. A few days later when I was using another Anker 7 in 1 USB-C adapter, I ran into the same issue but I know that adapter had been working well, then I realized I had to plug it into the port on the back of the PC. So I got this again and tried, it just worked like a charm. Hope they actually mentioned it on their product page so I wouldn’t have to return the first one. The cable length on this adapter is just right, not too long or too short when using with ROG ALLY (not hanging, since the cable is pretty sturdy, when I picked up the ROG ALLY, the adapter just comes along).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 18, 2025
★★★★★ 4
Reliable Hub That Gets the Job Done
Color: Blue, Color: Blue
Solid Anker USB C hub that does what it’s supposed to do. Ports work well and it’s easy to use right out of the box. Only downside is the hard plastic casing, it feels fine, but I could see it cracking if something heavy drops on it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 23, 2026
★★★★★ 5
Helped transfer data from Samsung Galaxy S21 with broken screen.
Color: Black
Helped me transfer data from a Samsung Galaxy S21 with broken screen. Simple put USB C end into phone , grab HDMI cable and plug into hub , then plug HDMI end into a monitor. Then grab a wireless keyboard & mouse and plug dongle into hub. Your phone will output to monitor and you can transfer data via Smart Switch using keyboard & mouse. Will only work if phone is unlocked I found on S21.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026